What During this process, the entire surface

Published by admin on

What is corrosion?Corrosion is the process through which metals in manufactured states generally deteriorate to their natural oxidation states as a result of reactions between the metals and their surrounding environment. Corrosion creates a natural voltaic cell in which the metal acts as an anode and often results in its loss of functional stability. The rate at which the metal corrodes is based on both the type of metal involved in the reaction and the metal’s environmental conditions.Corrosion consists of four different categories:General Attack Corrosion:This is a common type of corrosion caused by electrochemical reactions. During this process, the entire surface of the metal is attacked; however, this is a common issue with structural metals, making this form of corrosion predictable and thus possible to plan for and to manage.Localized Corrosion:This form of corrosion, as opposed to ‘general attack’, attacks only portions of a metal’s surface. Within this category of corrosion there are three subcategories:Pitting – creates small holes in the surface of the metalCrevice corrosion – occurs in stagnant locations of the metalFiliform corrosion – occurs when water gets under a corrosion-preventive coatingGalvanic Corrosion:This type of corrosion occurs when two different metals are together in a liquid electrolyte. This way one metal’s molecules are drawn to the other metal, leading to corrosion in only one of the metals.Environmental Cracking:During stressful environmental conditions, some metals crack or weaken, becoming brittle. Which metals are prone to corrosion?All metals can corrode. However, metals differ in their corrosion potential. Some, like pure iron, corrode very quickly in the proper conditions, while others, like the Noble Metals (including copper, palladium, silver, platinum, and gold) are much less reactive, thus they corrode rarely but are therefore more precious and costly. Alloys are often manufactured to be stronger than the average pure metal, and to hinder corrosion, which is why used more frequently in metal structures and appliances.What electrochemical processes take place during corrosion?Similarly to a battery, metals corrode through a series of oxidation-reduction reactions. When in contact with an electrolyte (water), a natural voltaic cell is created, in which the metal behaves as the anode. To begin the process, the metal is oxidized, forming a metal ion (cation) and free electrons. Iron (Fe) is used as an example:Fe(s) ? Fe2+(aq) + 2e-The free electrons then move through the metal to the outside of the droplet of water, and reduce the oxygen, forming hydroxide:O2(g) + 2H2O(l) + 4e- ? 4OH-(aq)Within the droplet, the hydroxide ions can react with the metal ions, precipitating on the surface of the metal:Fe2+(aq) + 2OH?(aq) ? Fe(OH)2(s)Rust is often produced as a result of the oxidation of the precipitate:4Fe(OH)2(s) + O2(g) ? 2Fe2O3 •H2O(s) + 2H2O(l)Under what conditions is the process of corrosion promoted?There are three main components necessary for corrosion to occur:Metal:Where the metal falls in the Galvanic Series determines how likely that metal is to corrode. This means that it is less likely for a metal near the top of the Series to corrode, especially when in contact with a metal near the bottom: in this case the resistance of the higher metal will be reinforced while the lower metal will corrode more (as in Sacrificial Anodes).Stressed areas of the metal’s surface will corrode more quickly because they are more active than the unstrained metal.Oxygen:Environmental factors such as oxygen concentration and temperature contribute to a metal’s likelihood of corroding.Electrolyte:Exposure to moisture, especially salt water, hastens the corrosion of metal.Other factors also accelerate the rate at which a metal will corrode. These include:pH;salt concentration;and velocity of waterWhy is corrosion a problem?Corrosion is a natural process, however, it becomes a problem in industry when the metal used in a particular product corrodes. The process causes the deterioration of infrastructures, machinery, and any other metallic products that face corrosion, generally damaging their framework and ultimately rendering them useless. Allowing corrosion to occur is economically inefficient, can inhibit productivity, and may even be dangerous. There are many instances where corrosion poses a problem in our world. Corrosion in itself is problematic, but specifically when the metal product is under great amounts of stress. The corrosion of the steel reinforcing bar in a block of concrete for example, is unseen and therefore overlooked; until it gives out. The resulting damage can include: failure of sections of highways, collapse of electrical towers, and damage to buildings, parking structures, and bridges, consequently generating heavy repair costs and unsafe public areas. Power plants are especially prone to corrosion (because of their water-steam circuits – metal components are constantly in contact with water) so if it occurs, it could be harmful to not only workers, but surrounding homes and civilians. An event of this caliber may be so dangerous that the plants are forced to shut down.What are the costs and consequences of corrosion?In 2016, the World Corrosion Organization estimated that the global cost of corrosion was about CAD$ 3.11 trillion annually, the equivalent of 3.4% of the global GDP (Gross Domestic Product). A 2003 study estimated that the annual impact of corrosion on the Canadian economy cost about $46.4 billion -roughly 2.5 % of Canada’s GDP. NACE International alleged that almost 50% of those costs could have been avoided using proper corrosion prevention techniques. Manufacturing and buying corrosion-preventive metals or materials can be costly and seem like a burden, but allowing corrosion to occur can damage metal products, which is very economically taxing and can put lives in danger. Insufficient corrosion prevention at a thermal power plant could include fatal repercussions if a worker is exposed to steam, gas, ash, or radioactive materials from a leaky component. Many negative consequences exist due to corrosion, but are there any positive effects of this process? Ironically, what good does come from corrosion is in fact a method to prevent further corrosion: a sacrificial anode is a highly active metal that is used to protect a less active metal by corroding in its place and forming a protective layer.How does corrosion affect the environment?Corrosion does not directly affect the environment, but some measures taken for the prevention of corrosion have been excluded. Some government regulations were issued prohibiting the use certain methods of corrosion protection because of the impact they had on the environment. Lead-based paints on houses and bridges, chromate inhibiting paints on aircraft, and oil-based paints throughout industry, normally used for corrosion prevention, were restricted in attempt to reduce smog and other negative effects on the environment.What corrosion-prevention methods exist?To prevent destructive corrosion, one must think ahead. Corrosion protection must then begin in the development stage. A good understanding of environmental conditions, metal properties, and their chemical interactions is necessary to construct a strong, stable, rust-free metallic structure. Engineers and architects work with metallurgical experts to select the proper metals/alloys for any situation. After that, special prevention techniques are used to protect the chosen metals:Painting: Coating the metal with a protective layer forms a barrier between the metal and the moisture that would corrode it. The downside to this method is that if at any location on the metal’s surface the protective layer is breached, that pinhole can become an immediate corrosion site, eventually spreading to the rest of the metal’s surface area. This type of protection can be used for structures and bridges.Plating: Plating is a more heavy-duty and long-lasting version of painting. In this method, a thin layer of metal, such as tin, nickel, or chromium is deposited onto the surface of the substrate metal using a number of different techniques including:Electroplating (electrolytic bath)Mechanical plating: (metal powder + aqueous solution)Electroless: (chemical reaction)Hot dipping: (molten bath of coating metal; used for fittings, fasteners, small items)Galvanization: a oxide-carbonate coating is formed using zinc: Fe+(aq) – 2e- ? Fe(s)  E°r = -0.44V Zn2+(aq) + 2e- ? Zn(s)  E°r = -0.76VBecause zinc is a stronger reducing agent, it will be the metal that is oxidized, producing a coating that clings to its substrate metal, and, as opposed to the painting method, will continue to protect the metal despite a scratch on the surface.Alloying: The combination of metals which form their own oxide coatings is also used to prevent corrosion. This type of protection is used in a variety of products including appliances and surgical implants.Cathodic Protection: Cathodic protection is the most common form of prevention for steel in buried fuel tanks and pipelines. The idea is that the metal is protected by electrons, causing the metal to become the cathode of the cell. There are two ways to approach this method:Sacrificial Anodes: by attaching a more active metal (and better reducing agent) to the metal being protected, the electrons of the voltaic cell will be supplied by the sacrificial anode and therefore keep the substrate metal from being oxidized (corroding). Common metals used as sacrificial anodes are: Magnesium (used for onshore pipelines because of higher resistance to electrolytes), zinc and aluminum (used on structures generally present in salt-water conditions, such as hulls of ships, small boat propellers/rudders, and production platforms because of lower electrolyte resistivity) Impressed current: by attaching the metal to the negative terminal of a DC power supply and an inert electrode to the positive terminal, the electrons will be continuously pumped to the metal being protected, thus rendering it unable to be oxidized. This cathodic protection approach is often used when structures, such as oil/gas pipelines, are too large to use the sacrificial anode method cost-efficiently.

Categories: Industry


I'm Iren!

Would you like to get a custom essay? How about receiving a customized one?

Check it out